How to Replace a UPVC Door Replacement Lock
If the lock on your door is jammed or doesn't work in the way it should, you may need to replace it. It may seem complicated however the procedure is simple and does not require a professional locksmith.
A few basic tools, a bit of patience and lots of care is all you need. Here's how to do it:
Measure the Door
If you're having difficulty locking your uPVC door or it isn't closing, then it could be time to get a new lock. If you've recently relocated, a tenant has left without returning the keys, or your multipoint gear box is showing signs of wear and tear, it's simple to swap out the barrel on your lock to a new one that provides an additional layer of security.
It is necessary to take measurements before buying an entirely new lock. This will ensure that the new lock will fit properly and not compromise the security of your home. upvc door locks replacement macclesfield repairmywindowsanddoors of these is the backset. It is the distance from the middle of the keyhole bore hole to the edge of the door. It's usually 2 3/8 or even 2 3/4 inches. Use rulers or measuring tapes to measure this, and then record the results on a piece of paper or notepad.
It is also important to know what the faceplate thickness is. This is the thickness of the part that covers the lock mechanism. If you can, purchase another lock from the same manufacturer because they'll be constructed to the same dimensions. If you can't find the manufacturers name or mark, just determine the width of the existing cylinder. You can also verify this by placing a pencil over the keyhole and measuring from the top of the lock up to the centre of the pencil mark on the opposite side of the cylinder.
Once you have the measurements you can begin removing the old cylinder. Begin by loosening the screw that holds the handle in place using a Phillips-head driver. Then, loosen the screws holding the interior and exterior handles to each other. After removing these screws, you can remove the barrel screw on the handle's exterior to release the cylinder.
If the cylinder gets stuck in the lock, you can try WD-40 or another oil or lubricant. It is important not to push it out with forcible turns could damage the internal gearbox and cause further issues with your lock. You may also want to think about upgrading to a lock that has anti-snap and anti bump protection, which is more robust against attacks from thieves.
Source the Lock
When purchasing the latest door lock, you need to consider the following aspects. Make sure you've got the right size cylinder for your door, and that you're buying from a trusted brand to ensure a good fit and high-quality. You'll require a few basic tools for the job, such as an screwdriver as well as a rubber mallet.
There are several signs your lock made of upvc is wearing out and needs to be replaced. The most common signs are visible damage to the lock or a handle that is loose and not fitting correctly. If the lock is jamming, or isn't locking at all, it's time to get a new lock.
Once you've found the right lock, it's important to get it installed correctly so that it functions correctly and locks securely. Follow the manufacturer's directions to install the new multipoint lock mechanism to the upvc door panel and attach the correct faceplates and handles. Test the mechanism by locking the door and unlocking it from the outside and inside. If all looks good then it's time to celebrate your accomplishment.
It may seem difficult to change the lock on a upvc however, you can do it yourself without the help of a locksmith. By recognizing indications that your lock is in need to be replaced and having the right tools to hand it's a relatively simple process.
Be aware that a lock made of upvc could benefit from lubrication as with any other part that moves. A few sprays of graphite powder can prolong their life by preventing excessive friction. Regular cleaning of your door lock mechanisms with WD-40 as well as a damp cloth will help to keep them in good condition.
Take out the Cylinder
It is possible to replace the barrel of your lock if you are having problems with your upvc door. This is a straightforward DIY project that can be completed in just a few moments and is a great method to maintain your home's security. This project requires you to determine the brand of the lock to find an appropriate replacement.
A damaged door lock can be a real pain and also a major security risk. Locks on uPVC door are prone to malfunction, which is why it's important that you maintain them regularly. In fact, experts suggest that you change your locks every seven years. If your lock is undergoing significant damage or you're not happy with its performance, it's worth seeking out the help of an expert.
In most instances, a pin-based system known as the euro cylinder is employed for uPVC doors. They are easy to use and don't fail to function, but they can still be a target for burglars. Therefore it's a good idea to replace the lock's cylinder by a newer model that incorporates anti-snap as well as anti-bump features to guard against burglary.
The first step in changing your uPVC locks is to remove the handle. This will expose the old cylinder. This can be a little tricky as there are usually some screws hidden beneath the handles, so make sure you have a screwdriver on hand. The next step is to gently tug and wiggle the cylinder until it loosens. Once it does, you can remove it from its socket.
Once you've found an appropriate replacement, it's simply a case of screwing it in place and then reverse the removal procedure. Be careful not to over tighten as this can cause the cylinder to become stuck in the door and stop working as it should. Test the uPVC replacement lock by opening it and closing it from both sides. It should now be in a position to lock and unlock it with your key! If not, make sure that the screws are tightened, then try again.
Install the Lock
Do some research to make sure the lock you choose is the right one for your door. You'll need to know the backset and faceplate measurements - which is the distance from the edge of the door to the center of the handle or cylinder and also the type of lock you choose to ensure the new lock is fitted correctly without any compromise in security.
After you've completed this, it's now time to install the new lock. You should ideally prop the door open, or secure it so that it doesn't close during the installation process. The first step is to loosen the screws that hold the handle together using a Phillips-head screwdriver. Once the screws have been removed and the handle is free of screws, you can slide the inner handle and the outer handle away.
You can now remove the old cylinder by unscrewing it. Once you've removed the cylinder and the barrel, you can install your replacement lock, ensuring that you follow the guidelines for your particular model. Once the lock is in place, you can test the new lock by removing and closing the door from the inside and outside by locking and unlocking it from the inside, and testing it again.
There are a variety of reasons you may need to change the lock on your uPVC doors. It could be because you've recently moved into the property and haven't got a key, or that the previous tenant didn't return the key or you may prefer the most secure lock. It isn't going to take more than five minutes to change the lock's cylinder.
No matter if your uPVC doors are equipped with single-point or multipoint locks, they all share the same mechanism. There are some issues that can arise like the failure to close or jam. They can be caused by wear and tear, weather conditions or simply from everyday usage. The majority of these issues can be easily solved with a bit of maintenance or by contacting locksmiths.